Aspirerelease/17.0
Watch Aspire live streamsDocsTry Aspire

Service

Handle
📦 Aspire.Hosting.Docker v17.0.0

Represents a Docker Compose service definition.

type Service interface{}

Properties

propertyCapAdd*List[string]get · set
Specifies a list of Linux capabilities to add to the container.
CapAdd() *List[string]
SetCapAdd(value *List[string]) Service
propertyCapDrop*List[string]get · set
Represents a list of Linux capabilities to be dropped from the service's container. This property can be used to restrict specific capabilities that the container should not have access to, enhancing security by implementing the principle of least privilege.
CapDrop() *List[string]
SetCapDrop(value *List[string]) Service
propertyCgroupParent*stringget · set
Gets or sets the parent Cgroup for the container. This property defines the name of the Cgroup under which the container's resource constraints are managed.
CgroupParent() (*string, error)
SetCgroupParent(value *string) Service
propertyCommand*List[string]get · set
Represents the command to override the default command specified in the image's Dockerfile. This property allows specifying how the container should run by defining an executable and its arguments.
Command() *List[string]
SetCommand(value *List[string]) Service
propertyConfigs*List[ConfigReference]get · set
Represents a collection of configuration references associated with the service. Each configuration is defined as a reference to an external configuration resource, which can be used to manage application configurations.
Configs() *List[ConfigReference]
SetConfigs(value *List[ConfigReference]) Service
propertyContainerName*stringget · set
Specifies the name of the container to be used. This property maps to the "container_name" field in a Docker Compose file. If set, the container will have the specified name; otherwise, a name will be automatically generated.
ContainerName() (*string, error)
SetContainerName(value *string) Service
propertyDependsOn*Dict[string, ServiceDependency]get · set
Specifies a list of services that this service depends on. The dependencies are expressed as service names with optional conditions. Supported conditions are: "service_started", "service_healthy", "service_completed_successfully" This property defines the order in which services should be started, ensuring that the specified services are initialized before the current service.
DependsOn() *Dict[string, ServiceDependency]
SetDependsOn(value *Dict[string, ServiceDependency]) Service
propertyDevices*List[string]get · set
Represents a collection of device mappings for the service container. This property defines the host-to-container device paths in Docker.
Devices() *List[string]
SetDevices(value *List[string]) Service
propertyDns*List[string]get · set
Gets or sets a list of custom DNS server IP addresses to be used by the service container.
Dns() *List[string]
SetDns(value *List[string]) Service
propertyDnsSearch*List[string]get · set
Specifies the domain search options for the service's container. This property allows you to define one or more domain search suffixes that will be appended to unqualified DNS queries performed by the container. Typically used to configure how DNS resolution should behave in specific network setups.
DnsSearch() *List[string]
SetDnsSearch(value *List[string]) Service
propertyDomainName*stringget · set
Represents the domain name of a service container.
DomainName() (*string, error)
SetDomainName(value *string) Service
propertyEntrypoint*List[string]get · set
Specifies the entrypoint to be used for the container. This property allows overriding the default entrypoint of the image and defines the executable or command that is run when the container starts.
Entrypoint() *List[string]
SetEntrypoint(value *List[string]) Service
propertyEnvFile*List[string]get · set
Represents a collection of paths to environment variable files used by the service. These files contain key-value pairs of environment variables that will be loaded and applied to the service configuration at runtime.
EnvFile() *List[string]
SetEnvFile(value *List[string]) Service
propertyEnvironment*Dict[string, string]get · set
Represents a collection of environment variables for the service container.
Environment() *Dict[string, string]
SetEnvironment(value *Dict[string, string]) Service
propertyExpose*List[string]get · set
Gets or sets a list of ports to expose from the container without publishing them to the host machine. This property defines internal ports that the container makes available to linked services or other containers within the same network, but these ports are not accessible from outside the container’s network.
Expose() *List[string]
SetExpose(value *List[string]) Service
propertyExtraHosts*Dict[string, string]get · set
Represents additional hostname-to-IP mappings for the service. These mappings allow you to manually define hostnames and corresponding IP addresses, effectively augmenting the DNS resolution for the service's containers.
ExtraHosts() *Dict[string, string]
SetExtraHosts(value *Dict[string, string]) Service
propertyGroupAdd*List[string]get · set
Gets or sets a list of additional group IDs to add to the container's process. This allows the container to have access to resources or permissions associated with the specified groups.
GroupAdd() *List[string]
SetGroupAdd(value *List[string]) Service
propertyHostname*stringget · set
Gets or sets the hostname for the service container. This defines the hostname that will be assigned to the container and can be used for network identification within the container's network.
Hostname() (*string, error)
SetHostname(value *string) Service
propertyImage*stringget · set
Specifies the Docker image to be used for the service.
Image() (*string, error)
SetImage(value *string) Service
propertyInit*boolget · set
Indicates whether the init binary should be used as the container's init process. When set to true, the init process is used to ensure proper reaping of zombie processes and signal forwarding inside the container.
Init() (*bool, error)
SetInit(value *bool) Service
propertyIpc*stringget · set
Gets or sets the IPC (Inter-Process Communication) mode for the service. This property determines how IPC namespaces are shared between containers and the host. It can be set to values such as "none", "host", or a specific container ID to share IPC resources with.
Ipc() (*string, error)
SetIpc(value *string) Service
propertyIsolation*stringget · set
Specifies the isolation mode for the container. This property determines the level of isolation between the container and the host system. Common values include "default", "process", or "hyperv", and the supported options may depend on the container runtime or the platform being used.
Isolation() (*string, error)
SetIsolation(value *string) Service
propertyLabels*Dict[string, string]get · set
Represents a set of metadata labels for the service. These key-value pairs can be used to organize and identify objects within the service configuration.
Labels() *Dict[string, string]
SetLabels(value *Dict[string, string]) Service
propertyMacAddress*stringget · set
Specifies a custom MAC (Media Access Control) address for the container's network interface.
MacAddress() (*string, error)
SetMacAddress(value *string) Service
propertyNamestringget · set
Gets or sets the name of the Docker Compose member.
Name() (string, error)
SetName(value string) Service
propertyNetworkMode*stringget · set
Specifies the network mode to be used for the container. This property determines the networking configuration, such as whether the container shares the network stack with the host, uses a predefined network, or operates in isolation. The value is typically a string that matches a network mode supported by the environment, such as 'bridge', 'host', 'none', or a custom network name.
NetworkMode() (*string, error)
SetNetworkMode(value *string) Service
propertyNetworks*List[string]get · set
Defines the collection of networks that the service is connected to. This property specifies the names of the networks the service should be attached to. Each entry in this list represents a network defined in the Docker Compose file or an externally defined network. Connecting a service to one or more networks allows inter-service communication across those networks, as well as communication with external systems configured on those same networks. If no network is specified, the service is connected to the default network that is automatically created by Docker Compose for the project unless network_mode is set to another value.
Networks() *List[string]
SetNetworks(value *List[string]) Service
propertyPid*stringget · set
Gets or sets the PID (Process Identifier) namespace configuration for the container. This property determines whether the container shares the PID namespace with the host or other containers, allowing process visibility and signal sending between them.
Pid() (*string, error)
SetPid(value *string) Service
propertyPorts*List[string]get · set
Represents a collection of port mappings for the service. Each mapping specifies how a container port is bound to a host port.
Ports() *List[string]
SetPorts(value *List[string]) Service
propertyPrivileged*boolget · set
Indicates whether the container should run in privileged mode. When set to true, the container is granted extended Linux capabilities and device access.
Privileged() (*bool, error)
SetPrivileged(value *bool) Service
propertyProfiles*List[string]get · set
Defines a list of profiles associated with the service. Profiles allow grouping of services and provide the ability to selectively enable services based on specified runtime profiles. If no profiles are specified, the service will be active in all configurations.
Profiles() *List[string]
SetProfiles(value *List[string]) Service
propertyPullPolicy*stringget · set
Specifies the policy for pulling the Docker image.
PullPolicy() (*string, error)
SetPullPolicy(value *string) Service
propertyReadOnly*boolget · set
Defines whether the service containers should be run in read-only mode. If set to true, the containers will have a read-only file system, limiting write operations to specific directories defined by writable mounts or tempfs.
ReadOnly() (*bool, error)
SetReadOnly(value *bool) Service
propertyRestart*stringget · set
Specifies the restart policy for the container. This property determines how the container should behave in case of a crash or termination. Common values include "no", "always", "on-failure", and "unless-stopped".
Restart() (*string, error)
SetRestart(value *string) Service
propertySecrets*List[SecretReference]get · set
Represents a collection of secret references used by the service.
Secrets() *List[SecretReference]
SetSecrets(value *List[SecretReference]) Service
propertySecurityOpt*List[string]get · set
Represents a list of security options that can be applied to the container. This is used to configure security-related settings specific to the container such as SELinux labels or AppArmor profiles, providing fine-grained control over the container's security behavior.
SecurityOpt() *List[string]
SetSecurityOpt(value *List[string]) Service
propertyShmSize*stringget · set
Gets or sets the size of the /dev/shm partition for the container.
ShmSize() (*string, error)
SetShmSize(value *string) Service
propertyStdinOpen*boolget · set
Indicates whether standard input (stdin) should remain open and be attached to the service container, even if no terminal is connected.
StdinOpen() (*bool, error)
SetStdinOpen(value *bool) Service
propertyStopGracePeriod*stringget · set
Gets or sets the stop grace period for the container. This specifies the amount of time to wait before forcing a container to stop after the stop or shutdown signal is sent. The value can be defined in a time duration format, such as "10s" for 10 seconds or "1m" for 1 minute.
StopGracePeriod() (*string, error)
SetStopGracePeriod(value *string) Service
propertyStopSignal*stringget · set
Specifies the signal that will be used to stop the container. This property allows you to define a custom stop signal other than the default SIGTERM.
StopSignal() (*string, error)
SetStopSignal(value *string) Service
propertySysctls*Dict[string, string]get · set
Represents a set of kernel parameters, specified as key-value pairs, that can be applied to the container at runtime. This property allows customization of specific Linux kernel settings (sysctl parameters) for the container, enabling fine-tuned control over its behavior. Common use cases include tuning network parameters or configuring shared memory limits. Note: Supported kernel parameters will vary based on the Docker daemon and the host system. Unsupported parameters will result in an error. Example: Use this property to set parameters like net.ipv4.tcp_syncookies or net.core.somaxconn.
Sysctls() *Dict[string, string]
SetSysctls(value *Dict[string, string]) Service
propertyTmpfs*List[string]get · set
Specifies a list of temporary file systems (tmpfs) to be mounted inside the container. Each entry represents a directory on the container's filesystem, mounted as a tmpfs, which resides in-memory and is typically used for ephemeral storage or caching purposes.
Tmpfs() *List[string]
SetTmpfs(value *List[string]) Service
propertyTty*boolget · set
Specifies whether a pseudo-TTY (teletypewriter) should be allocated for the container. When set to true, it enables the container to run with an interactive terminal session.
Tty() (*bool, error)
SetTty(value *bool) Service
propertyUlimits*Dict[string, Ulimit]get · set
Represents a collection of ulimit constraints for the service. Ulimits specify system resource limitations to be applied to the container, such as maximum number of open files or maximum stack size.
Ulimits() *Dict[string, Ulimit]
SetUlimits(value *Dict[string, Ulimit]) Service
propertyUser*stringget · set
Specifies the user that the container will run as. The value can be set to a numeric UID, a string for the username, or a combination of both (e.g., "UID:GID").
User() (*string, error)
SetUser(value *string) Service
propertyVolumes*List[Volume]get · set
Defines the list of volumes to be mounted into the service's container.
Volumes() *List[Volume]
SetVolumes(value *List[Volume]) Service
propertyWorkingDir*stringget · set
Gets or sets the working directory of the container. Specifies the directory in which commands are run inside the container. Corresponds to the "working_dir" property in a Docker Compose file.
WorkingDir() (*string, error)
SetWorkingDir(value *string) Service

Methods

methodAddVolume
Adds a volume mount to a generated Docker Compose service.
AddVolume(
source string,
target string,
options ...*ServiceAddVolumeOptions,
) Service
sourcestringThe source volume name or host path.
targetstringThe target path inside the container.
options...*ServiceAddVolumeOptionsOptional settings, described under Options.

Optional parameters are passed in a trailing options ...*ServiceAddVolumeOptions argument.

Type*stringThe Docker Compose volume type, such as volume or bind.
IsReadOnly*boolA value indicating whether the volume is mounted as read-only.
Configurefunc(obj Volume)callbackAn optional callback for further volume customization.
Service

The updated Docker Compose service.

Returns a handle; failures surface later via Err().