SeaweedFS integration in the AppHost

⭐ Community Toolkit

The SeaweedFS hosting package runs the SeaweedFS container and exposes its APIs when enabled. For an overview, see Get started with the SeaweedFS integration.

Installation

Install the package in the AppHost:

Aspire CLI

Aspire CLI — CommunityToolkit.Aspire.Hosting.SeaweedFS पैकेज जोड़ें

aspire add seaweedfs

Aspire CLI इंटरैक्टिव है; प्रॉम्प्ट पर उपयुक्त परिणाम चुनें:

Aspire CLI — उदाहरण आउटपुट

Select an integration to add:

> seaweedfs (CommunityToolkit.Aspire.Hosting.SeaweedFS)
> Other results listed as selectable options...

टिप्पणी

यदि केवल एक परिणाम है तो वह स्वचालित रूप से चुना जाएगा। संस्करण की पुष्टि अभी भी करनी होगी।

apphost.cs (C# file-based app)

C# — AppHost.cs

#:package CommunityToolkit.Aspire.Hosting.SeaweedFS@*

PackageReference (*.csproj)

XML — CommunityToolkit.Aspire.Hosting.SeaweedFS पैकेज संदर्भ जोड़ें

<PackageReference Include="CommunityToolkit.Aspire.Hosting.SeaweedFS" Version="*" />

Add a SeaweedFS resource

AddSeaweedFS starts the Master and Volume APIs. Call WithFiler to enable the native Filer API. Call WithS3 to enable the S3 gateway; this also enables Filer because the gateway depends on it.

TypeScript

apphost.mts

import { createBuilder } from './.aspire/modules/aspire.mjs';

const builder = await createBuilder();

const seaweedfs = await builder.addSeaweedFS('seaweedfs');
await seaweedfs.withS3();

const api = await builder.addProject('api', '../Api/Api.csproj');
await api.withReference(seaweedfs);

await builder.build().run();

C#

AppHost.cs

var builder = DistributedApplication.CreateBuilder(args);

var seaweedfs = builder.AddSeaweedFS("seaweedfs")
    .WithS3();

builder.AddProject<Projects.Api>("api")
    .WithReference(seaweedfs);

// After adding all resources, run the app...
builder.Build().Run();

The resource starts with Master port 9333 and Volume port 8080. WithFiler adds Filer port 8888; WithS3 adds S3 port 8333. Aspire assigns host ports automatically unless a method receives a fixed port.

Select APIs and host ports

Use the native Filer endpoint without starting S3. The example also sets a host port for the Master API and Filer API:

TypeScript

apphost.mts

import { createBuilder } from './.aspire/modules/aspire.mjs';

const builder = await createBuilder();

const seaweedfs = await builder.addSeaweedFS('seaweedfs');
await seaweedfs.withFiler(8888);
await seaweedfs.withHostPort(9333);

await builder.build().run();

C#

AppHost.cs

var builder = DistributedApplication.CreateBuilder(args);

var seaweedfs = builder.AddSeaweedFS("seaweedfs")
    .WithFiler(filerPort: 8888)
    .WithHostPort(9333);

// After adding all resources, run the app...
builder.Build().Run();

WithHostPort sets the host port for the Master API. The optional port parameters on WithFiler and WithS3 set the host ports for those endpoints.

Configure S3 credentials

AddSeaweedFS creates an admin access-key parameter and a generated secret-key parameter. Provide your own parameters when the S3 identity should use other credentials:

TypeScript

apphost.mts

import { createBuilder } from './.aspire/modules/aspire.mjs';

const builder = await createBuilder();

const accessKey = await builder.addParameter('seaweedfs-access-key', {
  secret: true,
});
const secretKey = await builder.addParameter('seaweedfs-secret-key', {
  secret: true,
});
const seaweedfs = await builder.addSeaweedFS('seaweedfs');
await seaweedfs.withAccessKey(accessKey);
await seaweedfs.withSecretKey(secretKey);
await seaweedfs.withS3();

await builder.build().run();

C#

AppHost.cs

var builder = DistributedApplication.CreateBuilder(args);

var accessKey = builder.AddParameter("seaweedfs-access-key", secret: true);
var secretKey = builder.AddParameter("seaweedfs-secret-key", secret: true);

var seaweedfs = builder.AddSeaweedFS("seaweedfs")
    .WithAccessKey(accessKey)
    .WithSecretKey(secretKey)
    .WithS3();

// After adding all resources, run the app...
builder.Build().Run();

The integration writes the selected credentials into the S3 identity configuration it generates for the container. Store secrets in a secret provider rather than source control.

Persist SeaweedFS data

Use WithDataVolume to persist /data outside the container lifecycle. Aspire generates a volume name unless you provide one:

TypeScript

apphost.mts

import { createBuilder } from './.aspire/modules/aspire.mjs';

const builder = await createBuilder();

const seaweedfs = await builder.addSeaweedFS('seaweedfs');
await seaweedfs.withS3();
await seaweedfs.withDataVolume('seaweedfs-data');

await builder.build().run();

C#

AppHost.cs

var builder = DistributedApplication.CreateBuilder(args);

var seaweedfs = builder.AddSeaweedFS("seaweedfs")
    .WithS3()
    .WithDataVolume("seaweedfs-data");

// After adding all resources, run the app...
builder.Build().Run();

Use WithDataBindMount to access a specific host directory directly:

TypeScript

apphost.mts

import { createBuilder } from './.aspire/modules/aspire.mjs';

const builder = await createBuilder();

const seaweedfs = await builder.addSeaweedFS('seaweedfs');
await seaweedfs.withFiler();
await seaweedfs.withDataBindMount('./data/seaweedfs');

await builder.build().run();

C#

AppHost.cs

var builder = DistributedApplication.CreateBuilder(args);

var seaweedfs = builder.AddSeaweedFS("seaweedfs")
    .WithFiler()
    .WithDataBindMount("./data/seaweedfs");

// After adding all resources, run the app...
builder.Build().Run();

Named volumes persist data without depending on a host path. Bind mounts are useful during development when you need to inspect or edit host files directly.

Use a custom S3 configuration file

Call WithS3ConfigFile after enabling S3 to mount a custom configuration file read-only at /etc/seaweedfs/s3-custom.json. The method throws if WithS3 has not been called:

TypeScript

apphost.mts

import { createBuilder } from './.aspire/modules/aspire.mjs';

const builder = await createBuilder();

const seaweedfs = await builder.addSeaweedFS('seaweedfs');
await seaweedfs.withS3();
await seaweedfs.withS3ConfigFile('./seaweedfs/s3.json');

await builder.build().run();

C#

AppHost.cs

var builder = DistributedApplication.CreateBuilder(args);

var seaweedfs = builder.AddSeaweedFS("seaweedfs")
    .WithS3()
    .WithS3ConfigFile("./seaweedfs/s3.json");

// After adding all resources, run the app...
builder.Build().Run();

The custom file replaces the generated S3 identity configuration. Define the desired identities and credentials in that file. The AppHost still exposes its credential parameters in the connection string; set WithAccessKey and WithSecretKey to credentials matching an identity in the file.

टिप्पणी

The file is mounted read-only. When you use it, manage the S3 identities in that file instead of expecting the integration to generate them.

Hosting integration health checks

The integration adds a SeaweedFS health check that queries the Master API at /dir/status with Accept: application/json. It requires a successful response containing a non-zero Topology.Max value, which indicates that the Volume Server has registered storage capacity. A running Master alone is not considered ready. This probe does not separately check the S3 or Filer APIs.

Connection properties

With both S3 and Filer enabled, referencing the resource creates a connection string with this shape:

Endpoint=http://{s3-host}:{s3-port};AccessKey={key};SecretKey={secret};FilerEndpoint=http://{filer-host}:{filer-port}

Endpoint points to the S3 API when enabled, or the Master API otherwise. The connection properties include Host, Port, and MasterUrl; S3Url, AccessKey, and SecretKey are available when S3 is enabled; FilerUrl is available when Filer is enabled. See Connect to SeaweedFS for client configuration.

Exported AppHost API

• AddSeaweedFS(name) creates the base Master and Volume resource.
• WithS3(s3Port) enables the S3 gateway and implicitly enables Filer.
• WithFiler(filerPort) enables the native Filer API.
• WithHostPort(port) selects the Master API host port.
• WithAccessKey(parameter) and WithSecretKey(parameter) select custom S3 credential parameters.
• WithS3ConfigFile(configFilePath) mounts a custom S3 configuration file. Call it after enabling S3.
• WithDataBindMount(source, isReadOnly) mounts a host directory at /data.
• WithDataVolume(name, isReadOnly) mounts a named volume at /data.

All listed APIs are exported to TypeScript AppHosts with their corresponding camel-case names.

See also

• Get started with the SeaweedFS integration
• Connect to SeaweedFS
• 📦 CommunityToolkit.Aspire.Hosting.SeaweedFS